Now many customers want to install an access control system on the automatic door, so that after the legal person swipes the card, the automatic door opens. When you come out, you can choose to open the door after swiping to confirm, or a person to open the door directly. Safety elements are integrated into the convenience and luxury of automatic doors.Remarks: The control method of the automatic door is that the infrared sensors of the entrance door and the exit door are respectively connected to the opening signal of the automatic door.
The infrared sensor of the automatic door generally has 4 lines connected to the terminal of the automatic door control board, two of which are power lines, no need to control. The other two are control lines. Remove the infrared sensor control line at the connection point of the automatic door control board. Originally connected to the terminals of the two control lines of the automatic door control board, respectively connected to the control points of the automatic door anode lock COM1 and NO1. Remember not to connect other contacts, and two door opening signals built in the automatic door anode lock NO contact and connected Switch button, access control card machine, remote control, infrared sensor.
If you need to enter the door to swipe your card, use an infrared sensor to open the automatic door. The wiring method is the same as above, and the infrared sensor control line is connected to the built-in anode lock of the automatic door, and two NO contacts of the door opening signal are required.